Removable dentures: types, features, reviews, prices

The loss of even one tooth in a row can lead to serious negative consequences for the health of the oral cavity as a whole, so it is necessary to solve the problem and restore lost dental units immediately. To restore lost teeth, modern dentistry offers different types of procedures - prosthetics and implantation. The greatest demand among patients is for more affordable prosthetics, which can involve both fixed and removable types of dentures.

In terms of durability and strength of fixation, the best option would be fixed dentures, but their installation is not always possible, and then removable dentures can help restore the beauty of your smile. However, such orthodontic structures are available in a wide range, and sometimes the patient finds it difficult to choose a specific type of product for prosthetics. This article is designed to help you find out all the useful details about removable dentures, and we will start with a detailed overview of all existing types of removable dentures.

Removable dentures: definition and classification

Orthodontic products for prosthetics can be either removable or non-removable. The key difference between the designs is that by choosing a removable denture, you can always either remove or put it on without the help of a specialist. Removable dentures have their own gradation into individual varieties, which is important to get acquainted with - this will help you make the right choice of a specific type of product. First of all, you should know that there are separate types of removable dentures for complete and single restoration.

How to choose a prosthesis?

It is quite obvious that the aesthetic characteristics of more expensive designs will obviously be higher, even taking into account everyone’s subjective assessment. Of the objective factors that will help you choose a prosthesis in the absence of teeth, there are two:

The first is medical indications. If the bone is very thin, it may not be possible to place implants without bone grafting. If the patient is aged, then such operations are carried out solely with an eye to the state of health. Mini implantations and conventional prostheses are often used.

The second is the patient’s requirements for the cost of treatment. This factor plays the greatest role in drawing up the final treatment plan.

Dentures for restoration with complete edentia

Complete restoration of the dentition is necessary when all teeth have been lost and a complete removable denture is used for it, which allows you to effectively solve the problem of tooth loss, but keep in mind that such designs do not differ in reliability and long useful life, and especially the so-called soft orthodontic products - from plastic or nylon.

The rapid wear of the prosthesis is explained by the fact that with a complete restoration it is not possible to achieve coordinated work of the masticatory muscles: the main pressure will be exerted on the mucous and gingival part of the oral cavity and cause a decrease in the natural volume of the tissues of the jaw joint. As a result of this effect, the height of the gums will gradually decrease, and this process will ultimately lead to the fact that the old prosthesis simply will not stay on the installation bed. Moreover, the incorrect position of the removable denture in the mouth will provoke manifestations of pain when eating or actively talking.

Full removable orthodontic products are not the best option for restoring lost teeth because they cannot be properly fixed in the oral cavity and, especially, in the lower jaw area. Even the use of special adhesive gels will not give you a guarantee that the removable denture will not fall out of its place at the most inopportune moment. In such cases, dentists advise not to save money and initially carry out restoration with removable dentures on implants, which we will discuss in detail below.

USEFUL FACT: Removable dentures do not stop the process of bone tissue atrophy and, on the contrary, accelerate its progress. As the bone volume decreases, the denture will no longer stay in place and will require replacement. This is another reason why it is recommended to replace a removable orthopedic structure with a non-removable product as quickly as possible.

Basal implantation

This method comes to the rescue when the patient’s oral cavity does not have the conditions for classical dental implantation - this is a high degree of thinning of the bone tissue and the impossibility of bone grafting. Implants are placed in the basal bone of the jaw, which is largely free from atrophy. Such implants are individually selected depending on the size of the bone and its quality. Metal roots are attached at a certain angle, deep into the bone. The installation of implants and prosthetics takes one week.

There is no need to talk about aesthetics in this case; basal implantation is used if there are no other options for restoring teeth.

The main advantages of basal implantation are lower cost, the possibility of implantation even in the absence of alveolar bone, no need to build up atrophied bone, low cost and short treatment time.

The disadvantages of basal implantation are poor aesthetics and the impossibility of installing a single implant. In addition, if the doctor acts ineptly, there is a risk of harming the patient more than helping him. The qualifications of the doctor play a decisive role when choosing this method of prosthetics.

Removable dentures for partial dentures

If the patient has preserved teeth in the rows and these units are absolutely healthy, for restoration it is optimal to select one of the existing types of removable orthodontic systems for partial dentures.

In partial prosthetics, dentists use structures equipped with a special type of fastener - clasps. At their core, clasps are miniature locks that are attached to the jaw. The elements are made from fairly strong metal wire, which guarantees reliable fixation of the removable denture.

It is important to understand that partial dentures are only possible if there are units in the dentition that can be used as support for the installation of a removable denture. Another important nuance that must be taken into account when selecting a prosthesis for restoration with a single edentia is that not all types of structures are aesthetic in appearance and therefore they are not recommended for installation in the smile area.

Classification of removable dentures in dentistry is also carried out according to the material of their production. The material used to make an orthodontic product is one of the key criteria for the proper selection of a removable denture, since such important indicators as the comfort of use of the structure, its reliability and durability depend on it. Below we will consider in detail all types of removable dentures based on the material used.

Indications for prosthetics

The main indications for dentures are:

• loss of one or more teeth as a result of illness, injury,
• serious defects in the dentition - chips, cracks, wide gaps between teeth,
• unstoppable erosion of tooth enamel,
• destruction of the crown of one or more teeth.

Some indications are subjective - for example, aesthetic defects such as uneven teeth, slight darkening or natural yellowness of the enamel. In such cases, there is often a desire to improve aesthetics, make teeth smoother, more uniform and more beautiful.

In all cases, the doctors at the Dental Master clinic will help you gain beauty and self-confidence, as well as restore chewing ability. We perform all types of prosthetics - quickly, efficiently and at affordable prices.

Plastic or acrylic removable dentures

Acrylic or plastic removable dentures are inexpensive and easy to manufacture and use. For their production, a special type of acrylic plastic is used, characterized by increased characteristics of strength, hygiene and hypoallergenicity. The product is fixed to the jaw with soft valves, which are more colloquially referred to as “suction cups”. Naturally, the quality of fixation leaves much to be desired - the soft fastening element does not ensure reliable adhesion of the structure and tissues of the oral cavity.

If you have chosen a removable prosthesis with valves, be sure to make sure of the quality of its manufacture. This can be done using a simple test: having installed the denture in your mouth, try to bite something with it. If you feel air escaping from under the removable denture, it means it is made with high quality and will be comfortable to use.

An acrylic prosthesis will not cause pain during use if its base fits tightly to the gums. Otherwise, the chewing load will be placed on the soft tissues, which will cause a process of gradual atrophy and then deformation of the orthodontic structure itself.

Expert advice: Order the production of an acrylic removable denture with an individual impression tray - this will guarantee a tight fit of the structure to the tissues of the jaw and ensure its most reliable fixation on the jaw.

The advantages of removable acrylic dentures include the following qualities:

• The design is manufactured quickly and simply, which makes its cost as affordable as possible for patients.
• Acrylic removable dentures are easily repaired and restored if broken or damaged.

However, acrylic products also have a number of disadvantages, which are important to study before choosing this type of removable dentures. Professionals call the main disadvantage of plastic structures the fact that when installed in the oral cavity, the base of a removable denture will block the palate and this often causes such undesirable consequences as diction disorders and a decrease in the natural sensitivity of taste buds.

Removable acrylic dentures cannot be used for prosthetics in the lower jaw area, since there is no way to firmly fix the structure on the gums. Without reliable fixation, there is a risk that the prosthesis will fall out during eating or active dialogue. Inexpensive removable dentures made of acrylic do not differ in durability. The product will have to be replaced with a new one every two to three years, since plastic is a material prone to deformation. The useful life of a removable acrylic prosthesis may be shorter in situations where the process of reducing the volume of bone tissue in a patient occurs at an accelerated pace.

If we talk about the exact cost of the service for the manufacture and installation of a plastic prosthesis, it will depend on the type of product and the need for additional procedures before prosthetics. You can get a detailed consultation on removable prosthetics at any time convenient for you at our dentistry in Moscow - VENSTOM (located next to the Baumanskaya metro station).

Installation Features

Removable structures have a base that imitates natural gums. Therefore, they look natural, like natural teeth.

In case of complete edentia, the removable denture is attached directly to the gums. The prosthesis fits tightly to the soft tissues, without displacement or loosening.

The prosthesis is fixed using clasps, hooks or implants. The lower part is attached to the roots of the natural teeth, and the upper part is attached inside the base of the structure. If the prosthesis replaces the entire dentition, then fixation occurs only on the gums.

Removable dentures made of nylon in Moscow

Another budget option for orthodontic structures for removable prosthetics are removable nylon dentures. Already from the name of the products it is clear that they are made from nylon - a soft polyamide with increased elasticity. This type of construction is applicable in both complete and single prosthetics. In the production of removable dentures, biocompatible and hypoallergenic nylon is used, which does not change color and properties under the influence of various external aggressive factors.

Dental nylon has a non-porous structure, which prevents the penetration of pathogenic microorganisms into the prosthesis. This quality distinguishes removable nylon dentures from products made of acrylic and other types of plastic. Nylon structures are fixed to the gums, where the base of the removable denture is fixed with special locks. Fastening elements are also made of nylon (less commonly, silicone) and therefore they remain inconspicuous against the background of the natural tissues of the oral cavity. Nylon clasps help to obtain the tightest possible fit of the removable denture to the bed, which is necessary for reliable fixation of the product in the mouth.

Among the advantages of removable dentures made of nylon are the comfortable anatomical shape of the products, compact size and low weight. These characteristics facilitate the process of adaptation to the design and reduce the risk of pain during the use of a removable denture. But orthodontic products made of nylon have not only advantages, but also a significant number of disadvantages:

1. A removable nylon denture does not provide coordinated work of the masticatory muscles and therefore excessive pressure occurs in the oral cavity on the soft tissues and mucous membranes. Constant loads on soft tissues and jaws accelerate the process of receding gums and reducing the volume of bone tissue.

2. Increased flexibility of the design leads to the fact that some of its elements will work more when chewing food, while others will work less. The result of uneven load is the patient’s discomfort while eating and fairly rapid wear of the removable denture.

3. Over time, the removable nylon denture sags and this phenomenon is fraught with inflammation in the oral cavity.

4. The surface of the product is rough and therefore plaque accumulates on the prosthesis, stone is formed, and an unpleasant odor may appear from the mouth.

Also, the disadvantages of removable dentures made of nylon include the significant time consumption for manufacturing the structure and the need for frequent and regular visits to the dentist for hygienic procedures to sanitize the denture base and the oral cavity.

Which removable dentures are better – acrylic or nylon? Comparison of designs and reviews from experts

What type of dentures is better - nylon or acrylic? Patients often turn to dentists with this question, finding it difficult to make a choice on their own. The answer to this pressing question will depend on in which area of ​​the oral cavity restoration is required and what kind of restoration it will be - complete or partial.

If it is necessary to carry out prosthetics with complete edentia, then it is more advisable to opt for acrylic removable dentures - they stay in the oral cavity better due to the “suction cup” effect. But nylon and acrylic removable dentures are equally poorly suited for restoration in the area of ​​the lower jaw bone - the products simply cannot be firmly fixed in this area. Therefore, here it is best to consider a fundamentally different type of structure - clasp dentures or dentures on implants. Nylon prostheses are inferior to plastic structures in terms of ease of use and durability. When using them, patients are more often concerned about painful relationships, and the care of a soft polyamide prosthesis requires more complex and specific care.

However, removable dentures made of acrylic are not suitable for the restoration of lost dental units with single prosthetics. The clasps of the prosthesis will be clearly visible, which can cause psychological discomfort to the patient. Therefore, for single dental prosthetics in the smile zone, preference is given to clasp or nylon products. Do you want to know more about plastic and nylon removable dentures and make the right choice of denture design? Sign up for a consultation with specialists at our clinic in Moscow – Vanstom! We are located next to the Baumanskaya metro station!

What material is it made from?

The most important characteristics of removable structures, such as secure fixation, wearing comfort and aesthetics, are determined by the materials from which these structures are made.

Plastic

Acrylic plastic is used to make plastic dentures. This option can be used for both complete and partial edentia.

The prosthesis is secured using the “suction effect”. The patient bites down on the denture, excess air comes out of it, and a tight fit to the gum is ensured.

Acrylic

The most popular and affordable dentures are acrylic. Used to restore partially lost teeth.

Pros:

• low cost;
• ease of manufacture and operation;
• good aesthetics - acrylic does not change its properties over time, and is not stained by coffee, tea or cigarettes.

Reviews of acrylic dentures are generally good, except for the possibility of allergies, which is why some patients remove them at night.

The photo shows an acrylic prosthesis

Nylon

Soft dentures are made from elastic nylon. They can be used for both partial and complete absence of teeth.

The positive aspects of nylon prostheses are:

• good level of elasticity;
• they are thinner and lighter compared to other materials;
• high flexibility.

These properties increase wearing comfort. However, this material has more negative aspects than positive ones. Firstly, the healing of the structure: due to the soft elastic nylon, the gums are greatly deformed, so bone resorption may even occur. Secondly, chewing food is often accompanied by pain. Finally, nylon dentures have to be adjusted frequently.

The photo shows a nylon prosthesis

Аcryfree

Acri-free - modern nylon prostheses. This material was first developed by an Israeli company. They occupy an intermediate position between plastic and nylon structures, incorporating their best qualities. Such structures are made from advanced acrylic plastic. They have a slightly greater degree of flexibility than acrylic ones.

Among the advantages they note:

• high aesthetic properties;
• wearing comfort;
• almost invisible thanks to the translucent material.

The photo shows an AcryFree nylon prosthesis

Spofadent

A new version of dentures, which includes three-layer plastic, which gives Spofadent dentures high strength. The material shows high aesthetic properties: it can be easily painted in various shades of pink and white. Dentures made from Spofadent are practically not exposed to chemicals contained in soda, drinks and food. Like Acryfree, this material is translucent, so it is excellent for prosthetics of front teeth.

Ivobase

It is an organic thermoplastic material, the chemical name of which is polymethyl methacrylate. The manufacturing technology of this material itself makes it possible to reduce allergic reactions and eliminate errors when installing dentures (overbite or excessive shrinkage).

Moreover, structures made from Ivobase have increased strength and low porosity, so the material is not stained by pigments contained in food and is slightly susceptible to bacterial attack. Such prostheses have high biocompatibility, quality and wearing comfort.

Vertex

Vertex is a modern thermoplastic material that is manufactured without the use of monomers, which ensures the absence of allergies, burning and itching when worn. Patients do not experience a feeling of dryness, articulation and taste perception are not impaired when using prostheses from Vertex. This material is stronger than other plastic structures, so manufacturers can make the base as thin as possible. You can choose shades of white and pink for each specific occasion. The material has good properties and is therefore suitable for full and partial prosthetics.

The photo shows the Vertex prosthesis

Deflex

The material comes from Argentina. It contains modern innovative thermoplastic polyamide. The base of such dentures is made completely transparent, and if desired, you can give it a pink tint. Such dentures are more flexible and durable than acrylic structures. They are recommended for police officers, firefighters, boxing athletes and other people with traumatic professions. However, this material has several disadvantages:

• ability to absorb odors;
• inability to repair the prosthesis.

Deflex is recommended for use only for partial dentures. However, if other teeth are lost, the entire prosthesis will have to be redone.

The photo shows the Deflex prosthesis

Dental dentures “Acry-free”

Innovative removable dentures are “Acry-free” dentures. These are elastic and flexible products made from unique raw materials based on acrylic resin. Acrylic gives the finished structure the necessary strength, rigidity and ensures its durability during operation.

Acri-Free removable dentures are often confused with products made of nylon or plastic, but this is a mistake: the designs have individual quality characteristics and are also easy to restore if the system breaks down. The material for making removable dentures Acry-free is biocompatible with the tissues of the oral cavity and is identical in color to the shade of the gums, which makes the finished structure aesthetic and invisible to others.

Choosing Acri-Free removable dentures is advisable if you have the following indications:

• An individual allergic reaction in a patient to metal alloys and plastic.
• The loss of both one tooth and the complete loss of dental units in rows.
• Periodontitis and periodontal disease. Installing a removable denture for this pathology will help prevent the process of further loosening of the teeth.
• Acri-Free soft prostheses are recommended for people whose professional activities are associated with an increased risk of injury.

Removable dentures of this type are valued by professionals for a significant number of advantages. In particular, the system may be used in prosthetics in cases where the patient has serious gum disease. Acri-Free structures are firmly fixed in the mouth, easy to repair, and the material they are made of does not cause allergic reactions or irritation of sensitive tissues of the oral cavity.

The advantage of Acri-Free is its excellent indicator of the tight fit of the products to the prosthetic bed, which eliminates the manifestation of pain when eating and helps to ensure proper functioning of the masticatory muscles. To install the system, it is not necessary to pre-file healthy teeth, and the prosthesis itself does not sag, does not absorb moisture, and pathogenic bacteria and foreign substances that can stain or damage the product do not penetrate into it. The structures do not require specific and labor-intensive care, their cost is lower than that of nylon removable dentures and, if desired, you can leave the denture on at night.

The only disadvantage of Akri-Free removable dentures is that their constant use will lead to gradual atrophy of bone tissue. But this disadvantage is characteristic of all types of systems used in removable prosthetics.

Classification of prostheses by material

Several types of materials are used for prosthetics that meet the requirements and standards of modern orthopedic dentistry.

Acrylic

A universal type of plastic, characterized by plasticity, lightness, and an affordable price. It is used for the manufacture of all types of removable dentures, as well as bases for prosthetics on pins. Disadvantages include insufficient strength and fragility (they last about 5 years).

Acry-Free

Biocompatible monomer-free plastic of increased strength, completely hypoallergenic. Resistant to mechanical damage, elastic, used in the best removable dentures. The service life is at least 10 years.

Acry-Free prosthesis

Nylon

Modern elastic flexible material, characterized by low density and light weight, hypoallergenic. Suitable for the manufacture of elements of removable dentures - bases, fastenings. The disadvantages are insufficient strength and fragility - nylon products must be replaced every 5 years.

Silicone

Flexible prosthetic removable structures are called silicone, but this material itself is not used in orthopedic dentistry. Patients confuse it with nylon or monomer-free plastic AcriFree.

Plastic

Widely used in dental practice for the manufacture of artificial teeth, temporary crowns, and overlays for metal dentures. One of the advantages is its low cost, and the disadvantages are fragility and instability to coloring. Serves no more than 2 years.

Acetal

A type of monomer-free plastic characterized by high strength and resistance to adverse chemical and physical influences. Durable, completely biocompatible, does not cause allergies. Used in the production of clasp prostheses of the new generation Quadrotti.

Zirconium

The most durable of the materials used in prosthetics. It has high aesthetic properties and durability (lasts for decades). A conditional disadvantage can be considered the abrasion of the enamel of the teeth located on the opposite jaw. Used for the manufacture of fixed prostheses, including crowns for prosthetics on implants.

Ceramics

In its pure form, the ceramic base - porcelain - is rarely used in dentistry due to its increased fragility. However, its derivatives are widely used - different types of glass ceramics. The most expensive and aesthetically attractive fixed structures are made from them - crowns, veneers, lumineers. The service life is at least 20 years.

Metal ceramics

This is the name for the combination of a metal base with a ceramic coating. The advantages are strength, aesthetics, durability. With proper care, a metal-ceramic prosthesis will last more than ten years. Used in the manufacture of permanent structures.

Composite materials

Polymer multiphase compositions from inorganic filler, silicon hydride, organic matrix. Characterized by durability and long service life. Used as a filling material for microprosthetics.

Clasp removable dentures

Prosthetics with clasp dentures are in demand among patients because they allow one to obtain the most reliable and at the same time aesthetic result for the restoration of lost teeth. Structurally, removable dentures are a plastic base with a metal alloy arch on which artificial teeth are attached. The product is fixed to the prosthetic bed with special locks, the type of which is selected based on the characteristics of the case and the preferences of the person requesting the service.

Removable clasp dentures are applicable for both complete and partial restoration and are graded into different types according to the method of fixation:

• Removable dentures with clasps have special hooks made of a metal alloy, which are attached to the supporting teeth.
• Clasp products with attachment. The lock of the prosthesis is hidden inside it and consists of two elements, one of which is attached to the artificial crown, and the second - directly on the tooth of the structure.
• Prostheses with telescopic type crowns.

Clasp dentures can be made from different materials - metal, plastic and metal-ceramics. This makes it possible to choose the best option for different and most complex cases. Clasp-type structures have both pros and cons, which must be studied before making the final decision to install just such a prosthesis. The advantages include the affordability of clasp dentures, aesthetics, no need to remove the product before going to bed, and easy care.

Among the disadvantages of removable clasp dentures, the main one is worth highlighting - the process of adaptation to them is quite lengthy and during it the patient may be bothered by painful sensations. It is also worth considering that the design may be noticeable to prying eyes if prosthetics are performed in the smile area. But as you can see, clasp removable dentures have far fewer disadvantages than advantages, and at the same time, they stay firmly in the oral cavity, ensure proper distribution of the chewing load, and prosthetic constructions can be combined with treatment of teeth and gums.

Read also

What are clasp dentures for teeth and which ones are better?

Dental restoration using clasp dentures is one of the most popular and budget methods.

Who is an orthopedic dentist?

Orthopedics in dentistry is a branch of medicine that deals with the restoration of teeth using all modern prosthetic techniques.

Removable dentures without palate

The denture base is made of durable dental alloy, onto which artificial teeth are attached. This product is considered a type of clasp removable dentures, but domestic dentists have also developed “sandwich” dentures, the manufacture of which uses a combination of two materials – acrylic and nylon. Such removable dentures are soft and quite comfortable to use, but at the same time they do not create the necessary and correct distribution of pressure when chewing; the fastening elements of the product look massive and unaesthetic on the teeth.

The gradation of structures is carried out according to the type of fastener:

• Elements in the form of loops. The loops are fixed on the supporting teeth and firmly hold the prosthesis in the installation area.
• Telescopic fastener.
• Attachments. The most reliable and aesthetic option for removable dentures without a palate, but at the same time the most expensive in terms of price.

Microprostheses

Innovative prosthetic technology involves the use of special thin metal-free products that cover damaged parts of the tooth. The procedure has both aesthetic and therapeutic value. The following types of microprostheses are distinguished:

• Tabs. There are metal and non-metal. Intraradicular, strengthening a weak root and as a replacement for an old filling. An intraroot inlay is a structure that replaces the coronal part of a damaged tooth, if there is an intact root. Crowns are placed on top of them. An inlay on the preserved crown of your tooth is an element that replaces the old filling.
• Veneers. Specific durable plates that are fixed on the visible surface of the teeth. Necessary for correcting the beauty of a smile and to avoid orthodontic treatment. They are selected to match the color of your own enamel, or according to the patient’s color preferences and therefore are completely invisible; the main thing is to restrain yourself and not make a fashionable “plumbing white” color.
• Lumineers. Marketing name for veneers. An analogue of the previous type of microprostheses, they are advertised as “thinner and do not require preliminary sharpening of the teeth,” however, in practice these are mutually exclusive paragraphs. If without grinding, you end up with huge banana teeth with all the problematic and masked areas of compromised enamel located under the lumineers. And if “thinner”, then you get multi-colored teeth, since veneers are usually needed by people trying to correct and hide something. Most often, the patient is given veneers using classical technology, with the words: “It’s not suitable for you personally without grinding.” In 2009, our clinic refused this contract with Cerinate and we no longer do lumineers.

• Micro locks. An alternative to attaching a bridge to abutment teeth, but with minimal impact on the latter. I explained everything about them earlier.

!Important:

Don’t worry, all this scary terminology “dentures” actually combines a lot of subgroups, starting with metal or temporary removable dentures, like in the USSR, and ending with high-precision metal-free 3D veneers, indistinguishable from natural teeth. There is no need to dive deeply into terminology; the attending physician in our clinic will explain everything before starting treatment and show you what will be best suited for you.

Let our doctors make the best decision and select the type of micro-corrective dentures to improve the color of the enamel, close cracks, treat chips and other dental defects. In cases of replacing missing teeth, implantation is probably the best solution, but if you are not ready for this yet, then an adhesive bridge without grinding the teeth will be the best and inexpensive option, allowing you to postpone implantation for several years.

Sincerely, Levin D.V., chief physician

Review of the advantages and disadvantages of palateless dentures

The main advantage of removable dentures without a palate is the convenience and safety of the design for the patient. After the restoration procedure, the patient quickly gets used to the installed prosthesis, normal diction is maintained, and there is no unpleasant sensation of strong pressure on the soft tissues of the oral cavity. A removable denture without a palate will ensure optimal distribution of the chewing load and this will reduce the risk of rapid bone tissue atrophy.

There are also disadvantages to removable dentures without a palate. For example, high price. The service for prosthetics with an innovative system will cost more than the installation of plastic or nylon prostheses. It is also worth knowing that for prosthetics with removable dentures without a palate, the presence of supporting teeth is mandatory.

Fitting and installation

The installation process will take only 2-3 days, and will require 3 visits to the doctor.

The initial stage includes a primary diagnosis of the oral cavity, the condition of the teeth and gums, as well as taking an impression. The production of a removable denture will take from 3 to 14 days, depending on the type of design chosen.

At the stage of installing a removable denture, it is important to assess the level of comfort when wearing it. It is important that the patient does not experience pain during fitting and does not rub the gums.

At the final stage, the doctor secures the prosthesis with clasps and tells the patient how to use and care for it.

In the case of implants with bar fasteners, support rods are first fixed in the jaw tissue. A short break will be required for implantation. After this, a completely removable denture is installed.

If the patient does not have the opportunity to undergo a rehabilitation period, an alternative may be implantation technology with immediate loading. In this case, tooth restoration takes 1-2 days.

With proper use, a removable denture will last you 7-10 years. If damage occurs, it can be repaired, but if the base is damaged or the dental crowns are severely deformed, then our experts recommend replacing the denture with a new one to eliminate the risk of injury to the oral cavity and infection.

Removable dental prosthetics systems on implants

The opinion of professionals is clear: implant prosthetics is the most modern and reliable solution, both for complete and partial edentia. The result of restoration using implants will not only be as durable as possible, but at the same time aesthetically pleasing and comfortable for the patient.

The procedure for installing removable dentures on implants is a long process and consists of several main stages:

• At the beginning of the restoration process, the oral cavity is prepared for subsequent manipulations. A thorough sanitation of the mouth is performed, and all dental diseases detected during the initial examination are treated.
• Next, the implant is implanted, after which a break is taken in the treatment, which is necessary for adaptation and healing of the damage.
• Crowns are installed and secured.

Removable dentures on implants can be made from different materials, the most budget-friendly of which are acrylic and ceramics. However, the cheaper the material, the more often the prosthesis will have to be changed, while products made from expensive industrial raw materials can last 10 years or more. Removable dentures on implants come in different types and differ both in the type of fasteners and in design - you can order both a single denture and a solid one.

Solid removable dentures on implants can be fixed in the patient’s mouth using different methods:

• Using ball-shaped fasteners. This fixation method is justified when only a few implants are required.
• Using beam fasteners. This installation method is optimal when securing a removable solid denture.

Another method of attaching a removable denture to implants is screw. The use of technology allows for high-quality restoration of the entire dentition, eliminating the need to install an implant on each unit - four implants will be enough to create reliable support for a removable denture. The advantages of the screw fastening method include the precision of fit of the structure on the implant, which ensures optimal distribution of pressure that occurs when chewing food.

Sometimes removable dentures on implants are called conditionally removable. This is explained by the fact that the fixation of the product in the oral cavity will be as strong as possible thanks to the locking system of the design. Such a prosthesis will not fall out when talking or eating and will look aesthetically pleasing and natural. However, the patient can, if necessary, remove the prosthesis at any time.

Prices for restoration with removable dentures on implants are quite high and they depend not only on the pricing policy of a particular dentistry. The full cost of the service will include the cost of preparing for implantation, manufacturing a removable denture, and the price of a specific design from a specific manufacturer. The choice of prosthetic technology will also affect the price of the procedure. But the costs in this case are fully compensated by the excellent and long-lasting results of restoration with removable dentures on implants.

There are a number of contraindications to prosthetics with removable dentures on implants, which you can find out about during a consultation with our dentistry specialists in Moscow - Vanstom. To make an appointment, just call us! We will offer you a full range of removable prosthetics services for complete or partial edentia and pleasant, affordable prices!

Types of fixed dentures

This type of prosthetics is indicated in the case of incomplete edentia - the absence of one to three teeth or their fragments. Its essence is to fix prosthetic structures on hard tissues using special cementing compounds. Fixed dentures can be temporary or permanent; they are made of zirconium dioxide, ceramics, composite materials, metal, and plastic.

Installation of this type of prosthesis allows you to solve a variety of problems. With the help of bridges, dental defects such as the absence of up to 3 adjacent teeth are eliminated. Cracks or chips of the enamel are masked with overlays - veneers or lumineers, which are firmly attached and prevent further destruction of hard tissues. In case of significant damage to the molars, inlays are installed instead of fillings. In case of partial or complete loss of the crown, an artificial analogue is placed.

Crowns

They are caps made of various materials that are hermetically placed on a specially prepared natural tooth. Preparation consists of preliminary treatment, depulpation (if necessary), and grinding. After preparation, an anatomically shaped prosthesis is made from the impression taken, and its temporary installation is performed. After a month, the dentist eliminates the identified deficiencies of the artificial crown and performs permanent fixation with medical cement.

Dental crowns

This type of prosthetics is performed using various materials:

1. Metal – alloy of cobalt with chromium, precious metals. It is used in modern dentistry only for prosthetics of chewing teeth, since it looks unnatural. Metal crowns are the most durable and also the cheapest (if they are made by KHS).
2. Metal-ceramics is a combination of a metal base with a ceramic coating. A more expensive and aesthetic option, not inferior in strength to the previous one.
3. Ceramics is lithium disilicate, which is a durable material that fully matches natural tooth enamel in transparency and color.
4. Zirconium dioxide - the best dentures that can be made are made from it - durable, aesthetic, but expensive.
5. Plastic - used as a temporary overlay or for cladding a metal structure. It quickly darkens, deteriorates, and stains, but is very cheap.

Crowns are the optimal way to restore a tooth that is more than half destroyed. Installing a crown restores the ability to chew food properly and makes your smile aesthetically pleasing.

Bridges

Fixed orthopedic structures designed for prosthetics of 1-2 (less often three) dental units in a row. Longer products are impractical because they do not bear the chewing load and do not have increased strength. Bridges are a series of monolithic crowns that are attached to supporting teeth or implants. They are made from modern materials - metal ceramics, zirconium dioxide, and metal. Depending on the method of fastening, they are divided into several types.

Adhesive

Recommended for prosthetics if you need to preserve healthy abutment teeth. A design feature of this type of bridge is the fastening in the form of thin horizontal fiberglass plates, which are fixed on the inner surface of one’s own teeth. The design is quite durable, and also has a number of other advantages:

• aesthetics - the fastenings are invisible because they are located on the tongue side;
• safety – healthy teeth are not subjected to grinding:
• low price - formed by reducing material consumption.

The disadvantages of an abrasive prosthesis include its fragility (average service life is no more than 2 years), as well as the thickening of the supporting teeth. The last factor is a consequence of applying fastenings and takes some time to get used to.

Cantilevered

Suitable for eliminating a single defect, since only the teeth on one side are used as support. The supporting units (one or more) are ground, and a crown with a console made of zirconium or metal-ceramics is fixed on them. Since this type of fastening cannot be considered sufficiently reliable, cantilever bridges can only replace incisors with canines.

This design lasts about 5-7 years, but does not slow down bone tissue atrophy and is not highly durable. In addition, the supporting tooth gradually shifts, so consoles are placed only when it is impossible to use the teeth on both sides as support. For the same reason, this type of prosthetics does not correct end defects.

Composite

A bridge of this type is placed in cases where the axes of the supporting teeth are not parallel to each other. The structural elements are movably connected using hinges, clasps, and the “groove-ball” system. The main advantage of a composite bridge prosthesis is the possibility of prosthetics of inclined dental units. In addition, they are quite durable (last 12-15 years) because they are made of metal.

Combined

Solid metal dentures are characterized by increased strength and also do not require significant grinding of the teeth. However, due to their low aesthetic appeal, they are used for prosthetics exclusively for molars. If part of the prosthesis is visible, metal can be combined with metal ceramics. For example, the crowns on teeth 7 and 6 should be made cobalt-chrome, and those on teeth 5 and 4 – metal-ceramic. This reduces the cost of making a prosthesis without compromising your smile.

Microprostheses

Microprosthetics are used for partial destruction of the crown, chips and damage to tooth enamel. It is an intermediate link between filling and installation of a prosthesis. Microprostheses are made of composite materials, metal, ceramics, and are fixed using cement or special glue.

Veneers and Lumineers

They are thin ceramic plates designed to correct defects in the front teeth:

• cracks;
• chips;
• spots;
• darkening of the enamel;
• gaps, irregularities;
• thinning of enamel.

Veneers are coverings for teeth

Lumineers with a thickness of 0.2 mm are more expensive, but have a service life of 20 years, do not require significant grinding of teeth, and are fixed with glue. Veneers are cheaper, but you will have to prepare about 0.7 mm of hard tissue, attach the plates with cement, and the service life of the lining is no more than 15 years.

Tabs

This method of prosthetics is suitable for restoring the crowns of chewing teeth. The orthopedic dentist makes an impression, with the help of which a microprosthesis is made from metal or composite. It is attached with cement and is several times stronger than conventional fillings. If the crown is completely destroyed, a metal or metal-ceramic core inlay is placed.

Dentures on implants

The best dentures that can be installed as quickly, efficiently, and for a long time are designs on implants. They are classified as conditionally removable, since only a specialist can remove or install them. The prosthesis consists of an artificial jaw with teeth, titanium pins, and abutments. Compared to traditional implantation, this prosthetic method has several advantages:

• installation in 1 day;
• no bone tissue augmentation required;
• can be placed without age restrictions;
• the number or condition of the teeth does not matter.

All-on-4 technology is suitable for prosthetics of both jaws. The procedure is performed one day after preliminary sanitation of the oral cavity. Installs two pins in the patient’s jaw in the front, without tilting, and two more on the sides at an angle. Abutments are attached to the artificial roots, and an acrylic prosthesis is attached to them.

All-on-6 is a variation of the previous technique, but using 6 implants. Suitable for people with significant atrophy, reduced bone density, and those with periodontal disease. Implantation using this method provides more reliable fixation, requires more materials, and therefore costs more.

Care

Cleaning a removable denture is not much different from cleaning natural teeth. Although it has its own characteristics.

After each meal, it is recommended to rinse them thoroughly with water. This will prevent bacteria and infection from entering the gums.

It is better to clean it with professional products suitable for its material. If the structure is completely removable, it is recommended to leave it in a disinfectant solution before going to bed.

Periodically check the denture for cracks and chips. If any damage is found, consult a doctor immediately.

For preventive purposes, it is important to visit the dentist at least once every six months. The specialist will conduct a professional examination, check the condition of the jaw and gum tissue, and also clean the dental bridge from contamination.

Immediate

Replace a unilateral included defect. The design can be created from any materials used in dentistry. Capable of restoring a row of holes. Also found under the name "butterflies".

Several artificial crowns are attached to a miniature base, secured with hooks and locks. Recommended as a temporary solution after removal of diseased masticatory organs.

For those who are going to install metal ceramics and do not have enough money, it helps to gain time to collect them. Some patients use it all their lives, replacing it with a new one after a few years.

Artificial jaws: types

First of all, let's define the terminology to make the following text easier to understand.

• Basis - the base, which looks very similar to the gum, fits tightly to the oral cavity. The borders are made of modern polymer materials.
• Fastening – various locks with hooks securing the entire structure to supporting healthy organs.
• Implants are elements firmly embedded in the base, replacing individual chewing units. In production, light components are used that are as close in color to real teeth as possible.

Classification by type

Types are divided according to the substances contained in the composition. However, a distinction based on how partial dentures are placed, how they are inserted and secured, and what the dentures look like is the most correct approach.

Lamellar

The most inexpensive and accessible way to restore chewing functions. The plastic base completely covers the curves in the patient’s mouth and the contours of the gums. They are attached to supporting intact masticatory organs. Acrylic, nylon, and other modern materials that prevent allergic reactions are used in the production of these implants.

Low cost with simple fixation are the main advantages. The age group of patients for their use is not limited. However, the restoration of chewing functions does not occur completely; diction may be impaired, and the structure does not hold well in the mouth. The photo shows the installation of removable plate and one-sided dentures on hooks.

Clasp

Artificial analogues are attached to a metal frame. Since the base is made of durable material, the product will last quite a long time. Installed using various hooks, crowns and other methods.

This type of substitution is not suitable for those who have allergic reactions to the main component. High cost is also a significant disadvantage. Among the positive features are strength, strong fixation, complete restoration, natural appearance.

Immediates

They cannot be considered a permanent solution, as they are temporary measures. The installation of partially removable dentures is shown in the photo.

For a short period of time they can completely restore all aesthetic and chewing functions. But, it should be remembered that their use is only possible when one or two damaged units are restored.

Low cost along with quick installation are positive aspects. Soft components make the implant unstable to heavy loads and greatly reduce its service life. The use of immediates is common in dental practice when it is necessary to prevent the displacement of remaining teeth towards the removed ones.

Alternative solutions

Atrophy of the jaw tissue becomes a serious argument in favor of fixed prosthetics. In the case of complete adentia due to bone deficiency, the optimal solution is immediate implantation, with fixation of the prosthesis for 2-3 days.

This technology includes All-on-4 and All-on-6 punctures. For installation, 4 and 6 dental implants are used, depending on the condition of the bone tissue. This technology allows you to fix a removable denture immediately after installing the implants.

Titanium rods are almost completely fused with the jaw bone. The prosthesis is tightly fixed to the implants, without the risk of displacement, and it can be loaded immediately after its installation.

The operation includes several stages:

• Initial examination, hardware diagnostics using 3D modeling technology.
• Preparing the jaw for implantation - removing decayed teeth, choosing a site for installing implants.
• Fixation of titanium rods in a gentle manner, with minimal surgical intervention (without deep incisions).

EspaDent's own dental laboratory allows us to produce a removable dental prosthesis in the shortest possible time, without loss of quality or extra costs.