Use of glass ionomer cements in pediatric practice

  • general information
  • Compound
  • Advantages of the drug
  • Flaws
  • Mode of application
  • Review of manufacturers
  • Price

Almost all patients, having decided on artificial restoration of teeth through prosthetics, know little about the materials used during the operation. Perhaps very few people know that there are a huge number of cement composites, each of which is designed for a particular clinical case. What is glass ionomer cement, what are its features and advantages, manufacturing specifics and varieties - this material is dedicated to this.

General information about glass ionomer cement

Glass ionomer cements (hereinafter referred to as GIC) are the latest innovative mixtures characterized by a heterogeneous structural content, where the base part is aluminosilicate glass, and polyacrylic acids act as a polymer matrix.

GIC is the optimal solution for placing fillings on a temporary basis, as well as being used as insulating liners.

Initially liquid in consistency, the mass gradually hardens and takes on the desired state. This happens in several stages:

  1. dissolution – the process of formation of ions;
  2. gelation – creation of gel-polymer chains, increase in pH level. The duration of the transition to this state is about 5 minutes;
  3. complete hardening of the material occurs within 24 hours.

The mixture reacts well with hard tooth tissues, intensely releasing fluoride elements. It is characterized by an average degree of strength, interacts better with enamel than with dentin tissue, and has an inhibitory effect on previously formed caries manifestations.

"Vinoxol"

"Vinoxol" is a two-component product. Accordingly, zinc oxide powder and liquid (a solution of polystyrene in guaiacol is supplied). This material for temporary filling is valued for its high strength, good adhesion, and antiseptic effect.

The components of the product (40 g of powder and 10 g of liquid) are stirred for 30 seconds, after which the composition is placed in the dental cavity. Its complete hardening occurs after 3-4 hours. During this time, the patient should abstain from drinks and snacks.

Dentists do not use Vinoxol as a lining before applying composite materials.

Composition of glass ionomer cement

The filling component consists of standard elements for such materials - distilled water and powder mass. As a result of their interaction, they become solid from a liquid state - this is ensured by the influence of acidic processes.

Most often, alkene polymers are used to create GIC:

  • maleic;
  • polyacrylic;
  • itaconic.

They help reduce the viscosity of cement, slow down the process of gelation of the liquid and bind all the elements into a homogeneous mass several times faster. These qualities have a positive effect on the service life of the composition.

The liquid part basically contains distillers or tartaric acid. Powder – calcium silicate glass and calcium fluoride drops.

Upon completion of the filling processes, fluoride ions begin to be actively released into the oral cavity, which is an excellent obstacle to the development of secondary caries manifestations. The silicate substance is necessary for proper acid reactions to occur. Mineral substances in contact with glass form a silicon film, which is subsequently impregnated with acidic masses. In this case, the processing time becomes shorter, and the hardening time, on the contrary, becomes longer. The same principle is used to ensure hygroscopic reduction.

Varieties

The most common types of temporary filling materials:

  • Zinc sulphate cement. Also known as artificial dentin. Here, “Dentin-paste”, “Dentin for dressings”, “Vinoxol” and so on stand out.
  • Zinc-eugenol cement.
  • Zinc phosphate cement.
  • Polycarboxylate cement.

We will present each group of funds in more detail below.

There is another classification. According to it, temporary filling compounds are divided according to their chemical composition into three groups:

  • Zinc-eugenol cements.
  • Eugenol-free cements.
  • Light-curing materials.

Advantages of glass ionomer cement

Glass ionomers have the following advantages, in comparison with analogue filling materials:

  1. ease of use - cement fills the cavity in one or two portions. Its use does not involve the processes of preliminary etching of the area and bonding of dentin;
  2. the unique property of hardening even in a humid environment - this quality ensures the active use of the composition in the treatment of caries cavities in the cervical zone, elimination of wedge-shaped pathologies, as well as caries, the affected area is the area located below the gum level;
  3. connection of the component with the tissues of dentin and enamel according to the intermolecular principle - makes it possible to install fillings with excellent marginal fit and eliminates the need to create retention areas during the treatment of the organ;
  4. complete adhesion to compositions with clove oil - thus, GIC is used as insulating liners that protect fabrics from excessive attachment of composites to them;
  5. adhesion to metal components;
  6. the ability to release ion enzymes into the organ cavity for at least a year after the filling is installed;
  7. weak shrinkage during polymerization - at the moment of transformation into a solid state, cement slightly increases in volume, which partially compensates for shrinkage processes;
  8. no irritating effect on dentin and pulp tissue - their composition is not aggressive and not dangerous in the treatment of deep caries if cement is used as a spacer;
  9. the thermal expansion indicator corresponds to the coefficient of expansion of the organ tissue - in such a situation, the filling is fixed more reliably, lasts longer, and its marginal fit is an order of magnitude better. This is a good preventive protection against the formation of damage to the enamel surface - cracks, chips.

Varieties

Temporary filling materials in dentistry are just one category. For convenience, a whole classification has been introduced that unites them:

  • Permanent. They are used to restore the anatomical shape of the tooth and its direct and indirect functions.
  • Temporary filling materials. Accordingly, they are needed for temporary closure of the dental cavity.
  • Medicinal. The group includes the so-called therapeutic pads: zinc-eugenol, containing calcium hydroxide or combined.
  • Materials for filling root canals.
  • Sealing materials.
  • Adhesive materials.

You may be interested in: What causes stomatitis: causes, symptoms and treatment

There is also a slightly different classification, drawn up from the perspective of materials science:

  • Metal materials for filling.
  • Polymer and plastic filling materials.
  • Cements.
  • Dental sealants and adhesives.
  • A set of composite materials.

Disadvantages of glass ionomer cement

The material is not without its shortcomings, some of which are quite significant:

  1. long maturation of the cement composition - it completely hardens only a day after installation, despite the fact that the first setting occurs within a few minutes;
  2. in the first hours the mixture is sensitive to a humid environment - it is at that stage that active leaching of ions occurs, which slows down the processes of final polymerization;
  3. poor resistance of the structural content to mechanical vibration - the material cannot be affected by a conventional drill immediately after installing the filling;
  4. etching of organ tissue is unacceptable;
  5. limited use for complex caries with a deep damaging effect;
  6. poor resistance to diametric tension, which completely excludes the use of GIC for the treatment of occlusal surfaces, as well as in clinical situations when the load on the tooth is distributed in different directions;
  7. shorter service life compared to conventional cement composite;
  8. average level of aesthetics, which limits its use on the frontal areas of the jaw row.

Method of using glass ionomer cement

The algorithm for using standard glass ionomer cements is as follows:

  1. thorough treatment of the working area with a conditioning liquid, which is washed off 20 seconds after application and the cavity is well dried;
  2. the damaged tooth is isolated from moisture and salivary secretions for the entire period of setting of the mass - about 5 - 6 minutes;
  3. the liquid and powder composition are mixed until a shiny, homogeneous thick mass is obtained;
  4. they place it in the organ cavity and form a filling, while ensuring dense condensation using a cotton swab or a special device with a spherical movable working tip;
  5. after giving the filling the desired shape, its relief is coated with varnish;
  6. after 1 – 2 days, treat with a drill. After this, the tooth can function normally.

Overview of glass ionomer cement manufacturers

Despite the fact that the composition of the GICs of the main manufacturers is almost identical, the following line of leading manufacturers are distinguished in the domestic market of dental materials, firmly holding the rating for a long period of time. It is advisable to consider the features in more detail.

Arde Kwik Tsem

It is a fluid hybrid mixture of a double solidification principle. Ideal for attaching veneers, bridge devices, and inserting pins during restoration with implants.

Thanks to its unique structural content and viscous consistency, it ensures the highest quality filling of the tooth cavity.

It has a serious disadvantage - it can provoke individual intolerance and cause allergic reactions of varying degrees of intensity.

Arde Fix

It is used for permanent fixation of orthodontic and prosthetic devices. Not prone to dissolution and oxidation in the oral cavity. If the composition is mixed correctly, side effects and complications are completely excluded. May cause a short-term decrease in the sensitivity of taste buds, which resolves spontaneously after some time. It does not tolerate the presence of eugenol elements in the work area.

Fuji Plus

A distinctive feature of the mixture is its modification with a composite, which provides a number of advantages:

  • stronger fixation;
  • possibility of use when interacting with metal, non-metal, ceramic prosthetic structures of all types in the process of orthopedic manipulations.

The disadvantage is the weaker light reflectivity of the material in the solid state.

Ketak Tsem

The main advantage is simplicity and ease of use. Shorter time for manual mixing and bringing to the required consistency.

It has high aesthetic indicators - a matte, slightly silky surface, which is especially important when working on the frontal area of ​​the jaw.

The disadvantage is sensitivity to low temperatures, which increase the hardening time.

Tsemion F

The composition has good radiopacity, withstands high mechanical loads in comparison with analogue products, and has a low solubility index.

Adhesive to enamel and dentin tissues.

Allows you to achieve a high level of marginal sealing, releases fluoride over a longer period of time, which helps strengthen tooth enamel. It has a low pain sensitivity threshold and causes virtually no discomfort in patients during the rehabilitation period after treatment.

Glass ionomer cement price

Depending on the manufacturer, the cost of cement of various brands looks something like this:

Arde Kwik Cem - from 1,300 rub.

Arde Fix - from 1,420 rub.

Fuji Plus - from 1,520 rub.

Ketak Tsem - from 1,380 rub.

Tsemion F - from 1,240 rub.

Having placed a filling from the material discussed in this article, you don’t have to worry that after a short time it will crumble under temperature or mechanical influence. And although in some respects cement is inferior to more expensive mixtures, with proper use the tooth will retain its functionality for a fairly long period of time.

Polycarboxylate materials

As for these cements, they are used both as temporary fillings and as spacers when filling with other materials. The method of making the mass here repeats that described above for artificial dentin.

There are a lot of materials for temporary fillings. But the same requirements are imposed on their quality. The compositions must not only protect the open dental cavity for a certain time, but also be safe for the patient.

Source

Rating
( 1 rating, average 5 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]