Narrowing of the upper and lower jaw: treatment of a narrow jaw in a child, men and women ✔️ Breketymodno.ru

Dental abnormalities are divided into malocclusion, configuration and location of specific teeth and rows.

A special pathology that can lead to severe complications:

reducing the distance between the jaw arches and disrupting their configurations;
narrowing of the dentition.

The configuration of a normal dentition is an ellipse (upper teeth) or a parabola (lower teeth). The remaining configurations are an anomaly. In mathematical terms, when the row decreases, the transverse diameter of the jaw arch decreases.

Description of the pathology

The normal shape of a row of permanent teeth resembles an elongated horseshoe. The lower jaw is naturally slightly narrower than the upper jaw - this is necessary for better closure of teeth and chewing food.

Narrowing of the jaw is called its reduction in diameter - the appearance of a “dent”. This happens more often with the top than with the bottom. It is formed by more porous bone and is more closely connected in the patterns of its development with the upper palate and other elements of the skull. But in fact, the process can affect both jaws, only the right or left side of one of them, or even both.

Another weak but obvious pattern is the increased frequency of curvature in the premolar area (4-5 teeth on each side), while “concave” anterior teeth are less common.

Size of modern human teeth

Over more than two million years, the size of teeth gradually decreased due to the transition to eating soft and processed foods. The first transformations affected the fangs - in primates they were larger and more strongly advanced relative to the rest of the row. The interdental spaces have disappeared, the size of the front teeth has become smaller. Refusal of raw meat led to a decrease in the chewing load and a narrowing of the jaw, as a result of which there was no room left for the “eights”. Now wisdom teeth are considered atavism and are often subject to removal.

Varieties

This disease has several variants.

Narrowing of the dentition along the entire length. Its typical sign is the appearance of a “horse” smile due to the fan-shaped incisors.
Trapezoidal deformity. With it, the patient's jaw takes on the shape of a trapezoid with clearly visible visually defined angles in the area of growth of the 3rd incisor or 1st premolar.
Narrowing in the anterior region. Here the incisors converge like a wedge and “climb” onto each other.
Saddle defect. With it, the row is “dented” inward at the level of the premolars (4 and 5 units on each side) with 6 and/or 7 molars. And the incisors and “eights” are usually positioned correctly, or they may be moderately crowded and rotated.
Asymmetry. This depression is observed only on one side, but, as a rule, affects both jaws. Often combined with normal occlusion in other areas.

All of them can be I, II or III degrees of severity. The pathology first appears in childhood, as temporary teeth are replaced with permanent ones. In adolescence and adulthood, consolidation of malocclusion leads to a change in the load on the mandibular joint, spreading secondary deformations to healthy areas.

The narrowing of the upper jaw is also accompanied by a deepening of the palatine vault and makes nasal breathing difficult. Plus, these processes provoke uneven wear of crowns and can lead to underdevelopment of units that do not have enough space.

Bad habits

In dentistry, “bad” habits include sucking a pacifier, finger, lips, biting your lips or tongue, and habitually holding various objects in your mouth. If you discover bad habits in your child, a visit to the orthodontist is recommended, regardless of the child’s age and the stage of formation of his bite. What are the dangers of bad habits? They form an incorrect bite. The mechanism of malocclusion is associated with the prolonged presence of some object that should not be between the teeth - be it a finger or a tongue. For example, thumb sucking or pacifier sucking (if the habit persists in children for more than 2 years) leads to the formation of a narrow upper jaw, protrusion of the front teeth, and the formation of an open bite (when the teeth of the upper and lower jaws do not meet each other vertically). It can also lead to a distal overbite (where the upper and lower jaws do not fit together when viewed from the side).

In the future, the protrusion of the upper front teeth forward due to a bad habit leads to an increased risk of injury to the teeth, including their loss. If you discover some bad habit in your child, it is important to contact an orthodontist as early as possible to receive recommendations and exercises to eliminate the bad habit and correct the bite if problems have already occurred.

Causes

The most difficult reason in terms of prevention and treatment for a narrowing of the upper or lower jaw by 2 teeth or more (II degree and higher) is unfavorable heredity, since most of the structural features of the skull are determined at the genetic level. But other factors related to childhood also make a significant contribution:

delay in introducing complementary foods;
habit of thumb or pacifier sucking;
early loss of baby teeth, especially molars or several units in a row on one side (the lack of chewing load in this area interferes with bone development);
lack of solid food in the diet;
metabolic disorders - rickets, type I diabetes mellitus, etc.;
parafunction (unjustified increased activity of a nervous nature) of masticatory or facial muscles, including bruxism, involuntary movements of the tongue, etc.;
rhinitis, sinusitis, tonsillitis, polyps and other diseases that force the child to breathe more often through the mouth than through the nose;
injuries.

It can also be provoked by a cleft palate, caused by a delay in intrauterine development.

Diagnostics

It is not difficult to determine the narrowing of the jaw in a child or adult during an external examination. Its clear sign is the “pressed-in” dentition in certain areas or along the entire length with partially expanded, crowded units. Another characteristic feature is malocclusion.

At the same time, it is necessary to distinguish pathologies of jaw development from atypical orthodontic and dental situations such as supernumerary units, macrodentia, individual structural features of the skull, etc. They can also be combined. Therefore, a preliminary diagnosis made visually is confirmed with the help of one or more additional studies:

According to Pon-Linder-Hunt , where the difference between the normal and existing width of the dental arch for a given patient is calculated using a special formula. The method requires taking several measurements directly in the oral cavity and taking into account different indicators for representatives of individual nations. But it gives the attending physician a fairly accurate answer to the question of whether several units will have to be removed to level the entire row.
According to Howell-Gerber-Gerbst - another relatively complex mathematical scheme that is well suited for measuring the shape, length, width and other individual parameters of a row.
Teleradiography is a type of X-ray examination that allows you to take a picture of the entire skull. It gives a detailed picture of the deviation itself and reveals its causes, if they are embedded in the structure of other bones.
Anthropometry is an accurate three-dimensional cast, on which it is easier to take the necessary measurements, especially when the upper or lower jaw of a child is narrowed.
X-ray - used to assess the condition of the upper palate and its suture, bone structure.
Orthopantomography - a classic frontal image, is now increasingly being replaced by CT (computed tomography) due to its improved clarity and expanded capabilities - such as obtaining 3D images.

In combination, these methods allow the orthodontist to study the current condition of the bone, the degree and direction of deformation when narrowing the upper and/or lower jaw.

When choosing a correction method, it is also important that they provide an opportunity to evaluate the resource for moving teeth into the correct position and straightening the bite.

Treatment in children

The optimal age for correcting a narrowed jaw in children is from 6 to 15 years. For violations limited to the apical base and alveolar process (the area of root growth and placement of their holes), braces are recommended. They will align their row in conditions when the rest of the chewing apparatus is formed correctly.

If the pathology affects the entire jaw or palate, removable or permanent plates are prescribed. They consist of a plastic or silicone base with expansion screws in the center. They are fixed using a system of arms, brackets and locks to give the correct position to the displaced units. If it is necessary to correct a deep bite, cross bite, etc., two-jaw structures with cheek shields are used.

In each individual case, the elements of the plate are determined and adjusted individually, using casts. Only the rigid frame and screws remain unchanged, which must be expanded by approximately 0.25 mm every 4 days. The advantages of the plates are:

wide frame color options;
low visibility to others;
mild impact on target structures.

Their low cost may also be an important argument. It rarely exceeds 10 thousand rubles, while the price of individual brace systems varies between 50-100,000 (ligatures made of plastic or precious metals, respectively). Plus, removable models are easy to care for and make it easier to maintain oral hygiene after eating. But when prescribing such plates to children, more control is required from parents.

The time of wearing them should be at least 20 hours a day, and the child is unlikely to comply with it himself due to the discomfort that persists even after the appearance of the habit.

Methods for expanding the upper and lower jaw

Hardware method

It is used in relation to both removable and permanent dentition. Dental expansion is performed by gradually affecting the jaw tissue. For this purpose, special expanding devices are used.

Here are the most common expansion designs:

The Derichsweiler apparatus is an orthodontic “device” with support rings and special arches. The supporting ring-shaped parts are placed on the molars, and the arches are fixed in the locks. The arches are also connected in the palate area, where there is a metal screw. When tightening the screw, pressure is applied to the jaw bones. Accordingly, the palatal suture gradually opens, and then the jaw itself expands. The free zone, which is formed when the palate opens, after a while is “overgrown” with hard tissue;
plates that expand the jaw - are used to correct mixed dentition with pronounced deviations in the development of the dentition. They are used, among other things, for the gradual expansion of the arch in children under the age of ten years. In essence, this is a removable structure consisting of a base plate and a palatal screw. The plastic plate exactly matches the relief of the palatine bone;
palatal expander – a special orthodontic device for expanding the upper jaw. The system includes support rings installed on the side crowns. One pair of expanders is placed on the premolar teeth, and the second is placed on the permanent molar teeth. Cross metal arcs are also soldered to the rings. There is a screw in the middle of the palatine vault, which is tightened and thereby exerts pressure on the lateral parts of the patient’s jaw;
expansion springs improve the correction result and also shorten the expansion period. For this purpose, different types of springs are used in orthodontics: pin-shaped, Coffin, Koller and others;
distractors - used to expand exclusively the lower jaw. In terms of its structure, the device differs from analogues in its flat body, which has a slider and a removable adjustment screw. Levers with ends in the form of wedges are needed for fastening in the tissues of the alveolar zone. The distractor helps expand the arch if the patient has a crossbite, eliminating the defect while gradually filling the bone tissue. This variability helps to correct pathology, including in young children.

Surgical method

Surgical expansion of the upper jaw is prescribed if there is no proper result after hardware correction.

Stages of surgical correction:

the patient is given general anesthesia;
the periosteum and mucosa are incised;
soft tissues peel off, exposing the cortical bone.
the selected expander is installed;
the mucous membrane is returned to its original place and then sutured.

Treatment options in adults

For patients over 18 years of age or with complex curvatures, more or less extensive surgical solutions are recommended. The simplest methods of treating narrowing of the upper jaw in adults:

Installation of the Derichsweiler apparatus - a beam screw design for the upper jaw only. He breaks the palatal suture and sets its bones in a new, wider position. Then the teeth are straightened with braces.
Normalization of the bite by removing several units in a row (in the vast majority of cases, the first premolars, 1 on each side). The method allows you to correct the bite and aesthetics of the smile without treating the narrowing of the jaw itself, if it is impossible or not necessary. Extracted premolars are not always redundant. But due to them, space is freed up for the remaining ones, and their location is again leveled with the help of braces.

In the case of the lower jaw, the layer of gum tissue is lifted, the bone is drilled in several places and the holes are connected with grooves. An expander is installed in them, with which the patient with a narrowing will need to go through several years, and the mucous membrane is returned to its previous position. This procedure is called jaw perforation.