Learn more about the positive and negative aspects of the Deflex denture

1003

Biologically passive thermoplastics of medical purity are increasingly being used for the manufacture of artificial organs and individual body structures.

The most famous and most popular thermoplastic for creating the basis for removable dentures is polyamide, patented under the Deflex brand.

Polyamide is developed by the Argentine company NUTEN as a material for the manufacture of the base of removable structures.

Features of the material

Deflex is a polyamide with a high elasticity index, which allows this material to be classified as a semi-rigid thermoplastic.

This feature gives polyamide significant advantages, and puts prostheses based on it an order of magnitude higher than nylon analogues in many characteristics.

Thus, the material has increased temperature stability , and reacts completely differently to temperature changes. Deflex, as is usually the case with nylon, does not harden when eating cold foods and does not soften when eating hot foods.

The simultaneous combination of the maximum density of polyamide with its minimum porosity provides high levels of strength, stability and durability of prosthetic products based on it.

And the low absorption of all kinds of liquids blocks the formation and fixation of bacterial plaque on the surface , the appearance of odor, and prevents distortion of the color of the structure.

The increased strength and elasticity of the material makes it possible to make a device whose thickness will be at least half that of acrylic, which guarantees it comfort when wearing, lightness, and preservation of the patient’s natural phonetics.

In addition, with such characteristics it was possible to distribute the chewing load evenly, prevent the formation of a shoulder load on the supporting elements and ensure the vertical stability of the entire structure.

Polyamide is a hypoallergenic material , which means it is ideal for patients who are prone to all kinds of allergic manifestations. Deflex is also distinguished by its natural transparency, which makes products based on it completely invisible.

Important! A unique combination of creation technology and material allows us to produce a functional prosthesis with ideal aesthetics. Such products comply with the Kennedy classification, combining 5 main functional properties - stability, support, retention, bending and occlusion.

The first signs of an allergy to dentures and ways to get rid of the problem.

Visit here to learn more about contraindications for removable dentures.

At this address https://www.vash-dentist.ru/protezirovanie/semnyie-p/vidyi-klammerov.html we will consider the types of retaining clasps.

What are nylon dentures

The prosthetics in question is an orthodontic solution that replaces lost natural teeth in situations where it is not possible to use bridges and implants.

To create prostheses of this type, synthetic elastic polymers - nylons - are used. Using them, they create flexible, elastic, removable systems designed to replace lost teeth. The color of the material is chosen exactly to match the color of the gums.

Elasticity reduces the adaptation period, making further wearing comfortable. It usually takes about 7 days to get used to it. The structure consists of a base, directly created artificial teeth and fixing parts. The base is made of nylon. The properties of the material eliminate irritation of the mucous membrane, friction and pressure on the jaw.

Pink translucent dental nylon skillfully imitates the natural color and structure of gum tissue. The prosthesis looks quite natural. For artificial teeth, plastics of a higher quality level are most often used. Which outwardly differ little from natural ones, they imitate not only this form from nature, but also the color. Fixation elements - clasps are made of dental nylon. Therefore, even with emotional communication, the fasteners remain invisible.

Thanks to the special qualities of nylon, it is possible to obtain a fully functional prosthesis, endowed with an attractive appearance and significant resistance to mechanical damage. The product retains color when interacting with pigmenting products. However, what is most appreciated in products of this kind is the absence of irritants in the composition, which completely eliminates the occurrence of various allergic reactions during wearing.

Areas of use

The area of ​​use of polyamide prostheses is quite wide. It is appropriate to install such products in patients with the following indications:

  • minor defects in the dentition, when 1-2 elements are missing;
  • edentia, i.e. not a single tooth survived;
  • allergic reaction to metal alloys.

Deflex dentures are also successfully used for patients suffering from periodontal disease or periodontitis, since there are no conditions for loosening of supporting teeth.

It is also advisable to recommend them to those for whom preparation is strictly contraindicated.

Polyamide structures are ideal for people who have traumatic professions, for example, firefighters, police officers, athletes, etc., since it is almost impossible to break them.

It is also recommended to choose Deflex for people who, due to certain restrictions, are contraindicated for implantation.

Such pathological conditions include:

  • heart failure;
  • thyroid problems;
  • immune system diseases;
  • hepatitis;
  • diabetes;
  • blood diseases.

Who is it suitable for?

Nylon denture systems can be installed to either recreate missing teeth or cover existing but unsightly ones. The use of prostheses is indicated in the following cases:

Products are installed if one or part of the teeth in the jaw is lost; they are installed in cases of complete edentia - the absolute absence of teeth. They are used when, for financial reasons, it is impossible for a patient to have implantation and installation of clasp types of prostheses.

Indicated when implants are prohibited from being implanted into a patient due to the presence of various diseases. Although nylon prostheses can be used even with existing diabetes, disorders of the cardiovascular system, even epilepsy and other diseases.

Nylon structures are often recommended for installation by children. They are used in situations where a baby tooth has been removed and a permanent replacement does not appear for a long time. In this case, prosthetics prevent the displacement of a number of teeth in the jaw and subsequent deformation of the bite.

Used in the presence of pathology such as periodontal disease. This untreated disease can lead to the loss of all teeth. Wearing a prosthesis is indicated only in the first and second stages of the disease.

Used for temporary prosthetics during the period of tissue adaptation during implantation.

Dentists sometimes recommend wearing them for people involved in dangerous work, a high risk of various injuries, including damage and loss of teeth: athletes, employees of the military and law enforcement agencies, and others.

Contraindications

Important! Removable devices, including polyamide ones, have virtually no contraindications for use.

They should not be worn by people suffering from:

  • pathologies of bone tissue;
  • mental disorders;
  • oncology;
  • acute or chronic inflammatory diseases in the body.

It is also not recommended to install them if you are depressed, pregnant, drug addicted, or undergoing radiation therapy.

Why dentures may become loose and what specialists are doing.

In this publication you will find detailed information on the adequate selection of abutment teeth.

Here https://www.vash-dentist.ru/protezirovanie/semnyie-p/raznovidnosti-bazisov-zubnyih.html all the most important things about creating the basis of a partial removable denture.

Possible breakdowns

Damage to the integrity of Vertex products is quite rare, however, dentists identify the following situations in which product repair may be required:

  • chipping or loss of an artificial tooth is eliminated in a dental laboratory by installing a new element of the row;
  • if the product adheres poorly to soft tissues, adjustment of the base may be required;
  • Elimination of a broken lock is carried out by replacing it with a new one;
  • When cracks or breaks in the base appear, it is repaired or a new structure is made.

Dentists pay attention that repairs should only be carried out by specialized specialists. Independent actions can cause even more damage to the structure.

Advantages and disadvantages

To understand all the features of the new generation designs, it is necessary to name their main advantages.

These products, in comparison with analog products made from other materials, have the following qualities:

  1. Adequately distributes the chewing load.
  2. Not subject to change due to temperature fluctuations.
  3. Stable in the oral cavity.
  4. They have good suction to the gums and retention, i.e. Fixed perfectly to the palate and gums.
  5. They have a short adaptation period.
  6. They do not cause discomfort to the gums and soft tissues, which means they do not cause irritation.
  7. Comfortable to use as they are light in weight.
  8. Durable and easy to care for, do not require the use of special cleaning agents.
  9. If the operating rules are followed, the dentures do not break. Microcracks do not form on their surface if accidentally dropped.
  10. They are not absorbed by intraoral fluids or odors and retain their original color.
  11. Shows perfect aesthetics.
  12. They do not change the taste perception of food.

Important! Polyamide prostheses under the Deflex brand do not have the disadvantages that are inherent in analogue products made from acrylic or nylon.


The disadvantages of the structures under consideration are isolated. It should be noted:

  1. High cost. Not all patients can afford to install a polyamide prosthesis, so the selection of the design should be done with a specialist, taking into account all the features of the clinical case.
  2. Little fame. Since the material is new and has been used in dentistry relatively recently, not all clinics can offer their clients products based on it.
  3. Impossibility of repairs. In the event of a breakdown, polyamide devices cannot be repaired (glued or welded) and will require re-prosthetics.

Automatic thermal injection press Deflex Integra 300 + starter kit

Deflex Integra 300 + starter kit

Deflex Integra 300 + starter kit

Automatic Micro Injection Denture Making Machine with Starter Kit

Equipment: Deflex Integra 300 with starter kit
Injection device Deflex mad 1300 1 PC.
Deflex Polyamide cartridges 1 PC.
Deflex Acrylato cartridges 1 PC.
Deflex M10XR cartridges 1 PC.
Deflex Supra SF cartridges 1 PC.
Deflex Fluence cartridges1 PC.
Deflex cuvette 1 PC.
Heat-resistant silicone grease 1 PC.
Anti-adhesion lubricant 1 PC.
Deflex polishing paste 1 PC.
Fluff brush 1 PC.
User manual 1 PC.

Deflex INTEGRA 300 Automatic programmable thermal injection machine.

The design of the heat press makes it possible to press all types of thermoplastic materials. Thanks to this, the user has the freedom to choose the material that best meets his requirements. An intuitive panel for setting denture casting modes simplifies the work of the dental technician. Automatic process control ensures stable quality of manufactured dentures. Vertical loading of the crushable cartridge and uniform pressure guarantee minimal shrinkage of materials.

  • Automatic operating mode
  • Heating the cuvette
  • 10 Preset programs, 4 of them are configured for Deflex material, 6 programs can be programmed for other materials
  • Digital membrane panel
  • Sound alert robots
  • Pneumatic injection cylinder

    Built-in pressure regulator and pressure gauge

  • Maximum temperature 500 ºС
  • Recommended temperature up to 390 ºС
  • Built-in heater
  • Warming up the cuvette from cold to hot
  • Practical cuvette clamp with protective cover
  • Compact design
  • Dimensions: 65x30x15 cm
DESCRIPTION

INSTALLATION

Using a hose with a diameter of Ø 8mm, connect the compressor to the compressed air inlet of the machine.

1. Air pressure: The machine is supplied set to a compressed air pressure of 5-6 atm (80/90 psi). If you need to change this value, follow the "Modify Pressure" instructions. 2. Compressor characteristics: The compressed air pressure at the compressor outlet should be set to a minimum of 7 atm (100 psi). 3. Air consumption: To supply compressed air, it is recommended to use a hose no longer than 5 m. A longer hose may cause a lack of air at the time of injection, even if the pressure gauge of the injection machine corresponds to the recommended range (5-6 atm). A sign of a lack of air can be a drop in pressure at the inlet of the machine, but the pressure gauge needle will not show a pressure value below 4 atm (55 psi).

Power supply

Insert the power cord into the outlet of the injection machine, and then plug into the electrical outlet.


INJECTION PARAMETERS

Pre-configured programs (#1-#4)

The machine has 10 injection programs. Four of them are configured for various Deflex materials (see table No. 1). The remaining 6 programs are free.

Material

Program

Classic SF

01

Acrilato FD

02

M10XR

03

Supra SF

04

Temperature 280ºC / 536ºF 265ºC / 509ºF 305ºC / 581ºF 260ºC / 500ºF
Т1 Melting time 15 minutes 15 minutes 15 minutes 15 minutes
T2 Injection time 30 seconds 30 seconds 30 seconds 30 seconds
Air pressure 5-6 kg/cm2

75-85 PSI

5-6 kg/cm2

75-85 PSI

5-6 kg/cm2

75-85 PSI

3 kg/cm2

43 PSI

Table No. 1

Please note the required air pressure for injection of Supra SF (3 kg/cm2=43PSI).

Free Software (#5-#10)

Select the program you want to use using the UP and DOWN buttons. After selecting the desired program, press the “ENTER” button. Then press "Menu" to access the settings:

Temp ºC Temperature
T1 Min (min) Melting time
T2 Sec Injection time

Table No. 2

When you have found a setting you want to change, use the Up and Down keys to change it. After setting the desired value, confirm the operation by pressing “Enter”.

Do this operation with all parameters. After setting all parameters:

a) Press “Enter” again to start the heating cycle.

OR

b) Press the “Cancel/E” key to return to the main menu

Air pressure setting

Air pressure is adjusted by default to 5-6 kg/cm2 = 75-85 PSI. If necessary, you can configure it. Pull the pressure regulator (toward you) until it clicks, then turn clockwise to increase pressure or counterclockwise to decrease pressure. Once you have reached the desired setting, press the control until you hear a click.

A test injection (without flask or cartridge) is recommended. This allows you to equalize the pressure and set constant parameters.

INJECTION PROCEDURE

Step 1: Turn on the machine

Press the “ON” button to turn on the machine.

The machine will not start to heat up until a program is selected.

Step 2: Select a program

Select the program that will be used depending on the material (see table No. 1). Confirm your program selection by pressing the ENTER button.

Step 3: Start the heating cycle

Press "ENTER" to begin the machine's warm-up cycle.

The heating cycle (the time it takes for the machine to reach the set temperature) is approximately 20 minutes. Do not install the cartridge into the machine at this time.

Once the temperature is reached, the injector will beep, it is necessary to confirm the start of the injection cycle, but before confirming the start of the cycle, steps 4,5 and 6 below must be completed.

Step 4: Treat the cartridge with silicone

Select the desired cartridge, open the container and treat the cartridge with silicone on all sides, avoiding treatment of the lid and base.

Note: Pre-treat the mold inside the oven with silicone.

Step 5: Installing the Cartridge

Insert the cartridge. The top of the cartridge is indicated by a round symbol in the center.

Step 6: Installing the Cuvette

Step 7: Start the injection cycle

Press "ENTER" (the display will switch from "Enter to start" to "Temp:__ ºC T1_")

Automatic injection

Once the time period set in Time 1 (15 minutes, or whatever was programmed) has been completed, the material will be introduced automatically. The injection will take 30 seconds (or whatever was programmed in Time 2), then the piston will lower automatically. This will be shown on the display when the text "EXPULSION " appears. Also, until the flask is ejected, an alarm will sound.

Step 8: Removing the Cuvette

Next steps after completion of injection:

— Unscrew the cuvette regulator

— Remove the cover of the device completely

- Using a glove, hold the cuvette and at the same time press “E/CANCEL” to activate ejection (no need to hold the button).

Do not try to force or speed up the ejection of the cuvette by pulling upward by hand. Simply hold the cuvette tightly with your hand until the plunger releases.

After removing the cuvette, you can press “E/CANCEL” again to lower the plunger. Otherwise, the piston will fall down automatically after 10 seconds.

Attention!: Do not touch the cartridge after injection, it is very hot!

Repeated injections

To perform a new injection using the same program, repeat everything from step 4.

If you want to set new injection parameters, start from step 2.

CARE AND MAINTENANCE

Cleaning mode:

The injector comes with a "Cleaning Mode" module, which allows you to freely raise or lower the piston to remove residual silicone base and aluminum.

To do this you need to do the following:

With the machine turned on, hold down the MENU key until CLEANINGMODE appears on the display, then press ENTER. The machine will enter cleaning mode. Open the lid completely and press “E/CANCEL” as many times as necessary to raise and lower the piston, thereby carrying out the cleaning process.

— Cleaning a heated oven. Use a swab by wrapping a paper towel around the tip of the tweezers. Wipe off any dirt or remaining residue with a swab.

— It is very important to clean the inner surface of the cuvette from any remaining plastic and other elements. Without cleaning the cuvette, the material becomes contaminated and the injected prostheses are damaged.

— The oven cleaning process should be carried out once a day or as many times as necessary to maintain complete cleanliness.

WARNINGS:

Hot surface -

Signal to read the instructions -

Grounding required -

— Keep in mind that the device is connected to a voltage of 220V or 110V.

— The power supply must be grounded and the machine must not get wet.

DANGER: Do not touch the oven while it is on.

DANGER: Never place your hands between the cuvette and its holding device.

It is normal if the display shows a temperature 4ºC higher or lower than the programmed temperature. This is not a sign of a device malfunction.

The INTEGRA 300 has an injection sensor that prevents the pneumatic piston from being activated if the lid is not closed correctly. The sensor does not work only in “Cleaning Mode”.

WARRANTY

  • The warranty period established by the supplier is 1 year from the date of purchase of the machine.
  • The warranty does not apply to malfunctions resulting from improper use of the machine.
  • Any unauthorized repair of the machine by the user will void the warranty.
  • The warranty does not cover defects resulting from accidents, incidents or natural phenomena.
  • When operating the machine, use a lubricant recommended by Deflex or its authorized distributor (see Injection Procedure, Step 2).

The warranty does not cover defects resulting from the use of any other lubricants.

Watch video >>>

Installation steps

The manufacture and installation of any model of removable systems is faster and easier than non-removable products. The entire process of restoring missing teeth can be divided into 2 stages: clinical and laboratory.

The clinical stage includes the following activities:

  1. Study of anamnesis . The doctor interviews the patient about his state of health, living conditions and occupation, studies his medical record in detail, and also finds out whether he has had experience with prosthetics and how comfortable the device was.
  2. Instrumental examination of the oral cavity, which determines the condition of the mucous membrane, remaining dental units, chewing muscles, and the quality of oral hygiene.
    The sensitivity of teeth is assessed, the symptoms of dental pathologies are identified and the degree of their severity is determined.
  3. Hardware examination of the dental system. Before prosthetics, CT (computed tomography), orthopantomogram, radiovisiography, MRI are used
  4. MRI (magnetic resonance imaging). The results are necessary to determine the limitations or indications for prosthetics, the choice of technique for restoring the dentition and the type of structure.
    Thanks to a complete examination of the dental system, a specialist can identify hidden dental pathologies, obtain information about the quality, density and volume of the jaw bone, the condition of the alveoli, dental roots, periodontal tissues and the temporal joint.
  5. Preparing the oral cavity . Hygienic cleaning, removal of remaining roots that cannot be restored and impacted dental elements, and treatment of identified pathologies (inflammation, caries, etc.) are required.
  6. Selecting a removable device model. Taking into account the number of remaining teeth, the condition of the oral cavity, and the location of the defect, the orthopedic dentist selects a design model.
  7. Receiving an impression. Using silicone or alginate mass, an impression of both jaw arches is made.


After the impression arrives at the laboratory, the laboratory stage of prosthetics begins. The entire creation process takes place in the following sequence:

  1. The impression technician casts models of both jaws (entirely or only certain areas), from which the prosthetic product will later be made.
  2. The specimens are secured so that the position corresponds to the patient's centric occlusion. To avoid making mistakes, an occlusal roller is made, which is sent to the dentist to determine the patient’s occlusion.
  3. The model is fixed on the articulator. In this position, a model of the future prosthesis is cast from plaster. The cushion is removed and artificial teeth are placed in its place.
  4. The sample is sent for the first fitting , during which the correct selection of the shade of artificial teeth to real ones and the accuracy of closure of the jaw arches are tested.
  5. Fit. After checking, the model is returned to the laboratory, where the technician, taking into account all the comments, forms the final version of the design.

The finished product is tried on again for the patient. It should fit perfectly in all respects. If deficiencies are found, the design must be adjusted.

Watch the video to see how the Deflex prosthesis is made.

A little about the manufacturer

Dental Import Export Company Dentimex was founded in the Netherlands in 1938. The company began its activities with the production of removable products made from acrylic materials.

A gradual increase in the product range, expansion of production capacity and the conquest of new markets led to the reorganization of the manufacturer and its focus on the production of high-quality innovative premium materials for the manufacture of dental structures.

Currently, Vertex-Dental is known in more than 75 countries around the world. It is engaged in the production and distribution of various components for the manufacture of structures:

  • hot and cold curing plastics;
  • insulating liquids;
  • polishing materials.

Particularly popular in orthopedic dentistry is the monomer-free plastic Vertex Thermosens, which makes it possible to produce systems for patients with increased sensitivity and susceptibility to allergic reactions.

Price issue

In large clinics, the cost of restoring teeth with a complete Deflex denture varies from 40 to 70 thousand rubles. The final price depends on the following points:

  • the amount of treatment performed before installation;
  • method of fastening the structure;
  • specialist qualification;
  • status and pricing policy of the clinic.

Partial models will naturally be 15-25 thousand rubles cheaper. A design that will replace only 1-3 teeth costs no more than 15 thousand rubles.

Reviews

Deflex polyamide prostheses are new and are still little known. But their use in dental restoration allows one to avoid the disadvantages that are characteristic of analogue structures made of nylon or acrylic.

You can talk about your experience of restoring missing teeth using Deflex dentures and your impressions of them by leaving a comment on this article.

If you find an error, please select a piece of text and press Ctrl+Enter.

Tags prosthetics removable dentures

Did you like the article? stay tuned

Previous article

For what purposes are temporary dental implants used?

Next article

Treatment of dental anomalies using the Schwartz apparatus

Competent care

In order for polyamide prostheses to retain their original appearance and functionality for a long time, you should adhere to the following rules for caring for them:

  • brush your teeth at least twice a day using a brush and toothpaste recommended by a specialist;
  • rinse your mouth after every meal;
  • carefully remove the artificial jaw from the mouth , avoiding its falls and impacts on hard surfaces;
  • To clean products, use a soft-bristled brush;
  • regularly disinfect the product using special solutions;

If discomfort or signs of structural damage occur, you should immediately contact a specialist.

Rating
( 2 ratings, average 4.5 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]