Manufacturing method and experience in using metal-free ceramics

Veneers – what are they?

There are two types of veneers:

  1. Therapeutic. Veneers are made directly on the patient’s tooth. Their composition includes composite materials that are very similar to filling materials. Often such dental devices are used for chipping (in this case, the chipping area can occupy 60%). That is, the procedure can be considered as restoration or extension of a tooth. If we do not consider the case of chipping, then under other circumstances the teeth are ground down a little, a veneer is formed, then they are ground and polished.
  2. Orthopedic veneers, lumineers. These materials are manufactured in a laboratory environment. In this case, an impression of the patient’s teeth must be taken. They are glued to the tooth using glue specialized for these conditions.

Therapeutic veneers are affordable for many. The price of their installation ranges from 2,500 to 15,000 rubles. The cost threshold depends on the prestige of the clinic, the characteristics of the treatment and the materials used.

Orthopedic ones are much more expensive in price than therapeutic ones. The price starts from 15,000 and goes up to 50,000 rubles. The same factors influence the price here.

Features of metal-free ceramics

Ceramics is an inert material that does not oxidize or react with saliva or the oral mucosa. Therefore, it is absolutely safe for the human body.

Advantages of ceramic dentures:

  • ideal aesthetics - ceramics have the same degree of light refraction (degree of transparency) as natural enamel;
  • such crowns do not darken or stain;
  • service life – from 6 to 10 years;
  • there is no characteristic metallic taste in the mouth;
  • hypoallergenic material does not irritate the mucous membrane;
  • to install the prosthesis, you do not need to remove a large layer of enamel (due to the thin walls of the crown);
  • there is no need to depulpate the tooth (remove the nerve and pulp).

Learn more about the features and advantages of using metal-free ceramics in this video:

Installation of veneers

The procedure includes several stages.

  • The first stage is preliminary. At this stage, the material and color are determined.
  • The second stage is preparation. The procedure involves removing hard tissue from the tooth.
  • The third stage is taking an impression. An impression is taken of the tooth and sent to the laboratory.
  • The fourth stage is the installation of the plate. The plate is temporary. It is made of plastic.
  • The fifth stage is the production of a plaster model in the laboratory. The result is a ceramic plate.
  • The sixth stage is fixation of veneers. They are fixed with special glue.
  • The seventh stage is removal of cement and assessment of the occlusion.

The success of veneering largely depends on the correct fixation and the materials used.

Fixation of veneers

Three components are involved in fixing a tooth to a plate:

  • hard tissues (tooth);
  • fixing material for fixing veneers;
  • ceramic veneer.

The adhesion strength of these components is the most important requirement in the veneering procedure.

It is very difficult to connect the components. They are all completely different materials. Ceramic veneer is an organic compound. Fixing materials are composite substances containing an inorganic filler or an organic matrix. Teeth are compounds of enamel, dentin, pulp and some others. Due to this composition, it is impossible to obtain a solid bond using a conventional chemical reaction.

Preparatory activities

Before fixation, the following steps must be completed:

  • preparing the surface of the veneer itself;
  • tooth surface preparation;
  • preparation of fixing material (use cement for veneers).

Veneer preparation

The essence of the preparation is to create a certain roughness on the surface of the veneer, which will subsequently come into successful contact with dental tissues. How is it achieved? Hydrofluoric acid (10%) is used as an activator. The surface is etched with it for several minutes (from 1 to 4). The acid does not act on the entire surface, but in selected areas. It only dissolves silicon oxide. The result is the necessary micropores.

To improve the quality of roughness, sandblasting is often used. This process requires good skills. If you are not professional, you can damage the front surface.

Before fixing the veneer to the tooth, it is washed with water and dried.

Afterwards, a silane agent is applied to the inner surface, which gives a binding effect. Silane substances bind tightly to the adhesive and silicon oxide. Such actions are necessary for further tight bonding between the ceramic and the adhesive. The result is that the adhesive thoroughly wets the ceramic surface. Silane application time is 60 seconds. Further steps involve drying the surface using an air jet.

Tooth preparation

Cement, gel (used for fitting) and other foreign substances are carefully removed from the tooth enamel. To do this, use a sandblasting machine and rotating brushes. Afterwards, the surface is etched with phosphoric acid (37%). Acid etching creates the necessary microrelief, which further promotes adhesion. The etching exposure is 30 (40) seconds. If dentin is etched, the time is no more than 15 seconds. Its increase can provoke the collapse of collagen fibers.

When finished, wash off the phosphoric acid with plenty of water. Primer is applied to the tooth surface, left for 30 seconds and dried well. Finally, adhesive is applied. The actions are carried out simultaneously with the application of adhesive to the prepared veneer surface. This is the adhesive fixation of the veneers.

Preparation of fixation material

The fixation material is a different composite material. A wide variety of materials allows you to choose. The selected material is applied to the surface of the veneer from the inside and pressed against the tooth with careful movements. The composite material that has protruded beyond the surface of the tooth is removed. After polymerization has taken place, the tooth is ground, polished, and checked. Particular attention is paid to the adhesive seam. If this is required, then a general adjustment is made.

Cement is used as a material to fix veneers. There are many different fixation operations performed in dentistry. Unfortunately, it is not possible to use the same material everywhere. Its properties are not always suitable for fastened elements.

The ideal cement for veneers is a material that has good adhesion to the tooth structure and to the veneers themselves. And it must have the following requirements:

  • resistance to various types of loads;
  • ease of use and subsequent cleaning;
  • insolubility in oral fluids;
  • resist caries;
  • even a small layer thickness should give high efficiency.

Variolink Veneer dental composite cement meets these requirements. It is intended for fixation of restorations (composite and ceramic) whose thickness does not reach 2 mm.

Variolink veneer has the following necessary and important characteristics:

  • high wear resistance;
  • high color fastness;
  • very good consistency;
  • high adhesion strength;
  • high translucency;
  • ease of removal.

Fixation of crowns on the front and chewing teeth

Ceramic crowns for chewing teeth

Crowns and bridges made of zirconium dioxide are ideal for restoring lateral teeth. They can withstand any chewing load. But there is one exception: such designs are not recommended for male patients with too massive jaws. Perhaps, in this case, the dentist will still recommend installing metal ceramics.

On the front teeth

Metal-free ceramics of any type (zirconium dioxide or porcelain) are placed on the front teeth. However, there are also contraindications, including bruxism (involuntary night grinding of teeth), crowding or mobility of incisors, and straight bite.

Lumineers

The perfect (Hollywood) smile can be achieved with lumineers. The design of lumineers is slightly thinner than conventional veneers. The shape is similar to petals. To fix lumineers, veneer adhesive is used.

There are standard and individual lumineers. The former have a variety of colors and sizes. They are somewhat similar in installation to false nails. The latter are made in the laboratory depending on the individual characteristics of the patient.

Lumineers increase the volume of teeth. They are used in cases:

  • Slight discoloration of teeth. The design of the devices is very thin (0.3 mm), translucent, so they cannot hide the obvious unevenness of color.
  • Small diastemas between teeth. Lumineers cover them well.
  • The presence of chips on the teeth and their concealment. Here, individual lumineers will be used, in which the thickness at the chip site should be greater.
  • The appearance of cracks in the enamel that you want to hide.

Lumineers have a significant drawback, which manifests itself in a short service life due to low reliability. Broken material unfortunately cannot be repaired. Some procedures will need to be completed first.

A positive aspect of veneering is that the glue on which it is attached contains the element fluorine. Therefore, experts say that wearing such structures is beneficial for tooth enamel.

After installing the veneers, the dentist will invite the patient for a second appointment. This will happen in about a week. The doctor will examine your teeth and gums. He will look at how the teeth have adapted to the installed material. In addition, the doctor can perform the final steps to adjust the veneers. That is, after his manipulations, the mouth will look even better. Now it will be easier for the tooth and veneer to cope with their functions.

Emax metal-free crowns

Emax dental crowns are made from solid porcelain (pressed ceramic). Porcelain is a material that is closest in composition to tooth enamel. Only single crowns, as well as veneers and inlays are made from it. The product is formed by injection molding under high pressure. Pressed ceramic contains a large amount of leucite crystals (minerals), which provides the highest strength.

Emax metal-free ceramics are the optimal option for implant-supported prosthetics.

Situation: veneer failed

In practice, there were cases when the veneer fell off. How to fix? You need to assess the situation and carefully study the problem, and the doctor will suggest a solution.

If the material has simply peeled off, then you need to remove it with careful movements (so as not to damage it).

If you see in your mouth that one part has peeled off, then there is a possibility that the device remains intact. If the veneer falls off as a whole, then the doctor will definitely be able to fix it in place.

In case of obvious breakdown of the material, the dentist will have no other solution but to replace it with a new one.

How can you tell if the entire veneer has fallen off? You need to look at the condition of the fallen element. If it has a symmetrical and rounded shape, then the veneer is intact. If you look closely at the tooth and see a residue on it, then the veneer is 100% broken.

In order to help the dentist with further treatment, you must show him the fragments. It is recommended to save all parts of the broken material. To do this, you need to fill a small box with cotton wool and put the debris there.

Next, you need to report the incident to the doctor. The doctor will solve the problem. But in general, the potential risk of such a problem is small. The tooth will remain without protection for some time (two weeks). There will be no significant changes in him for weeks.

Veneer detachment can be detected independently. It happens that you feel a rough surface (as opposed to a smooth veneer) in your mouth. The tip of the tongue undergoes irritation. And yet, a ground tooth will definitely react to temperature changes, since the surface has no protection.

And in the future, carefully analyze the situation and determine what actions you took could cause the breakdown. Once you find the answer, never repeat such actions again. If you cannot determine, consult your dentist.

Advantages

Metal-free ceramic structures do not require a metal frame; they use a natural mineral, zirconium oxide (ZrO2), as a base, onto which a ceramic composition is subsequently applied. Due to its special physical and chemical characteristics, the material is not only characterized by high resistance and bending strength, but also has a structure similar to the human skeletal system. Its main biotechnological advantages include:

  • strength and durability;
  • special, aesthetically attractive liveliness and natural appearance of the restored dental surfaces. Excellent light and color rendition of the transparency and shine of real teeth;
  • an ideal contact surface of the frame structure of the denture to the patient’s tissues, as a result of which the penetration of disease-causing pathogens and the development of periodontal disease and caries is impossible;
  • maximum preservation of the vitality of dental surfaces. Minimal grinding of the supporting or crowned teeth is necessary (ultra-thin thickness of the installed frame, not >0.3-0.4 mm), above the gingival surface, without disturbing the circular ligament of all dentitions;
  • complete bio-inertness (harmless to humans) and compatibility with periodontal tissues, hypoallergenic properties, absence of allergic reactions;
  • high shock absorption capacity, low load on the periodontium;
  • low surface porosity, eliminating the possibility of subsequent appearance of tartar and plaque;
  • metal-free ceramics do not cause rejection;
  • versatility of application - both frontal and chewing groups can be restored;
  • protection from temperature changes in the oral cavity and complete absence of painful reactions to cold or heat;
  • do not change color during wear, do not wear out;
  • comfort and ease of wearing orthopedic design;
  • ease of subsequent care.

Care

If you take special care of your veneers, you can wear them for decades. In this case, of course, it is necessary to undergo preventive examinations. What are the care activities? They need to be cleaned thoroughly twice a day. You can use both a brush and paste.

Veneers are installed for cosmetic purposes. It should be remembered that the strength of the material is low, so you need to take care of their condition. It is necessary to ensure that bad habits (for example, biting nails) do not find a place in the patient’s life. In addition, you should not consume foods that are colored (for example, coffee, tea).

Sources used:

  • “Aesthetic dentistry and ceramic restorations (Tuati B.)
  • Criteria for evaluating composite dental restorations / A.I. Nikolaev and others - M.: MEDpress-inform, 2015.
  • “Adhesive ceramic restorations” (Manier P.)
  • National Library of Medicine (USA)

Price of ceramic crowns

Average cost of ceramic microprostheses:

  • Emax solid crown – from RUB 13,000. for 1 unit;
  • metal-free crown made of zirconium dioxide – from RUB 16,000.

This price does not include temporary plastic onlays (about 1000 rubles), as well as the removal of diagnostic impressions (from 800 rubles).

If you are looking for dentistry with affordable prices for prosthetics, we suggest looking at the list of clinics on our website. Just enter the desired city area into the search system.

Rating
( 2 ratings, average 4.5 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]